Skip to main content
Free shipping to service points over SEK 799
  • English
  • Deutsch
  • svenska
Spray-On Textile Waterproofing
Spray-On Textile Waterproofing

Spray-On Textile Waterproofing

200 kr
Tax included.

Environmentally friendly and biodegradable impregnation. Recreates the garment's water-repellent function without affecting ventilation or the structure of the textile. Water-based, free of fluorocarbons and made in Sweden.

The impregnation can be used on all your waterproof functional garments but also works on other textiles such as cotton, fleece and wool. However, you get the best results with synthetic materials such as polyester or polyamide. The impregnation is completely free of fluorocarbons, solvents and other potentially hormone-disrupting substances. Note that the impregnation does not give the same beading effect as a spray that is not fluorocarbon-free.

The impregnation is developed and manufactured in Sweden by the environmental technology company OrganoClick, it is biodegradable within seven days. One bottle is enough for 5-6 garments or 10-12 square meters depending on how the fabric absorbs.

How to use:
1. Wash the textile/garment (without fabric softener) and make sure the material is completely dry.
2. Protect the work surface, shake the bottle and spray the garment/textile from a distance of 20 cm and ensure that the entire material is evenly moistened.
3. Wait 1 min and spray again and distribute the liquid evenly with a cloth (protective gloves are recommended as the product has a rather low PH).
4. Wipe off the excess liquid with a cloth or sponge, being careful not to leave any drops behind, as this may stain the fabric. It is important not to overdose.
5. Dry the textile in a tumble dryer or drying cabinet (40–70 degrees) for the best effect (if washing instructions allow), but it is also possible to let the product dry on its own for at least 24–48 hours.