Wash-In Textile Waterproofing

Environmentally friendly and biodegradable impregnation. Recreates the garment's water-repellent function without affecting ventilation or the structure of the textile. Water-based, free of fluorocarbons and made in Sweden.

Unique impregnation that works on all your waterproof functional garments but also on other textiles such as cotton, fleece and wool. Best results are achieved on synthetic materials such as polyester or polyamide. The impregnation is completely free of fluorocarbons and other potentially hormone-disrupting substances. Note that the impregnation does not give the same beading effect as an impregnation that is not fluorocarbon-free. In exceptional cases, previous impregnations on the garment may interfere with the process and the result may then not be achieved.

The impregnation is developed and manufactured in Sweden by the environmental technology company OrganoClick, it is biodegradable within seven days. One bottle is enough for 4-6 garments depending on size/thickness.

How to use:
1. Wash the textile/garment (without fabric softener) and make sure it is properly rinsed, but it does not need to be dried.
2. Shake the bottle, dose approx. 100 ml/garment in the detergent compartment or in the washing machine in a so-called laundry ball, for padded garments or for a material that has been washed a lot, approx. 150 ml is recommended.
3. Run a short washing program at 30-40 degrees with spinning (see the garment's washing instructions).
4. Dry the textile in a tumble dryer or drying cabinet (40–70 degrees) for the best effect (if washing instructions allow), it is also fine to let the product dry on its own for at least 24–48 hours for the impregnation to have an effect. It is important to let the garment dry completely before use so that the fibers have time to stand up to be able to carry the water drops. If the garment is damp, it can have almost the opposite effect.